| |
You are making an offer on a Demaco Single Screw Extruder located in United Kingdom. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
The Demaco Extruder is a 4.5 inch horizontal press equipped with a force feeder attachement as th infeed and a rotary cutter at the output end.
The extruder is capable of producing over 550 lbs of small balls/hr.
It requires temp, controlof between 18-40 degs,C .
Note that this unit was rebuilt in 2003.
23 HP /40 amps.
2 sets of spare crated Demaco Extruder Screws are stored in the Wrigley, Plymouth, WEST Storeroom, EquipNet Tag No 11142350, measuring 1600mm x 400mm x 600mm high, weighing 500 Kgs, together with the Demaco Extruder Control Panel, EquipNet Tag No 11142351, measuring 900mm x 650mm x 1300mm high, weighing approx 400 Kgs.- Manufacturer Demaco
- Year 1995
- Capacity Speed 550 LBS/HR
- Voltage 415 VOLTS
- Frequency 50 HERTZ
- Phase 3
- Removal Difficulty EASY
- Estimated Shipping Weight 3500
- Requires rigging or removal NO
- Requires a flatbed truck YES
- Level of shipment preparation necessary UNCRATED/LOOSE
- Height 2.5 M
- Length 1.2 M
- Width 2.2 M
- Additional Component Dimensions 0
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
United Kingdom
Dimensions: 2.5x1.2x2.2 M
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
|
Store